Guangzhou Hedsom Building Material Co., Ltd
|Place of Origin:||shanghai|
|Minimum Order Quantity:||50 buckets|
|Packaging Details:||25kgs /bucket|
|Delivery Time:||1-10 days|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||500000 buckets per month|
|Main Raw Material:||Acrylic||Density:||1.4 Kg/L|
|Names:||PVC Flooring Conductive Adhesive||Usage:||Construction|
sheet flooring adhesive,
waterproof floor tile adhesive
Conductive PVC flooring Adhesive Environment - Friendly Water Based Adhesive M760D
This product is a kind of dispersion one-component antistatic adhesive, which is widely used to paste many kinds of antistatic and static dissipative sheet PVC flooring.
Without dilution, please stir before use, and then use the appropriate B3 teeth scraping the glue evenly coated over the substrate surface. According to the construction site of the temperature and humidity, wait for about 10 minutes (more than 50% of the film becomes transparent) surface can be laid in mortar floor, then push plate with cork flooring flattened, with 50 kg of rolling device rolling on the paved floor, can achieve the best results. Please refer to the laying of the floor around the board company information.
①A suitable porous absorbent, strong, dry, smooth, no cracks, no grease, no wax floor.
②For the hard cement-based self-leveling screed.
③For aerial wood flooring, plywood or particleboard cushion.
Large area coating Construction is good Good tack early Economy practical
Containing conductive carbon fibers Environmental protection
Subfloor if oil, water and mold release wax , wax water decontamination required treatment ; minor sand from the ground suggested M318 water-based primer (porous absorbent subfloor ) bottoming closed; does not smooth ground recommend the use of flat subfloor self-leveling for leveling ( leveling thickness of at least 2mm); wet subfloor moisture treatment recommended by two component epoxy moisture primer. The presence of cracks is recommended to use two-component epoxy material subfloor repair.
If the temperature is below 15 ℃ construction or relative humidity greater than 75%, please consult our technical staff opinion. Do not glue dumped into sewers or drains. Unused glue should be sealed. Tools can be cleaned with water.
Packaging and Storage:
25kg plastic pails. The product should be stored at room 5℃-35℃, prevent freezing, exposure. Shelf life of 12 months.
|Waiting time||About 10 minutes (due to temperature and humidity vary)|
|Construction time||After the completion of total waiting time, about 30-60 minutes (due to temperature and humidity vary)|
|Load time||≥72 hours|
|Bleeder resistor||lower than 1x106 ohm|
Contact Person: winsom