Guangzhou Hedsom Building Material Co., Ltd
|Place of Origin:||shanghai|
|Minimum Order Quantity:||50 buckets|
|Packaging Details:||25kgs /bucket|
|Delivery Time:||1-10 days|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||500000 buckets per month|
|Main Raw Material:||Acrylic||Density:||1.4 Kg/L|
|Names:||Linoleum Flooring Adhesive||Usage:||Construction|
flexible floor tile adhesive,
sheet flooring adhesive
7 - 8 PH Strong Linoleum Flooring Adhesive Water Based For PVC Sheet Flooring M770
Efficient water-based adhesive for linoleum floor coil and sheet flooring layer on the absorbent substrate.
Without dilution, with B3 sheet tooth scraping the glue evenly over the surface coated in construction. If the surface of the open barrel found some film, wipe off and then stir. If the surface found a small amount of clear liquid, stir and then need to glue construction. According to the construction site of the temperature and humidity, wait about 5-10 minutes after (sticky hands drawing a clear sense of touch) can spread the glue on the surface of the floor, and then push the plate with cork flooring flatten, then 50 kg pressure roller rolling on the paved floor, can achieve better results.
①A suitable porous absorbent, strong, dry, smooth, no cracks, no grease, no wax floor.
②For the hard cement-based self-leveling screed.
③For aerial wood flooring, plywood or particleboard cushion.
High tack, strong sticky end Long working hours Economy practical
After curing extrusion impact resistant furniture Steering Wheel Environmentally friendly
Subfloor if oil, water and mold release wax , wax water decontamination required treatment ; minor sand from the ground suggested M318 water-based primer (porous absorbent subfloor ) bottoming closed; does not smooth ground recommend the use of flat subfloor self-leveling for leveling ( leveling thickness of at least 2mm); wet subfloor moisture treatment recommended by two component epoxy moisture primer. The presence of cracks is recommended to use two-component epoxy material subfloor repair.
If the temperature is below 15 ℃ construction or relative humidity greater than 75%, please consult our technical staff opinion. After opening mortar surface as a film, you must first remove, stir before use. Do not glue dumped into sewers or drains. Unused glue should be sealed. Tools can be cleaned with water.
Packaging and Storage:
25kg plastic pails. The product should be stored at room 5℃-35℃, prevent freezing, exposure. Shelf life of 12 months.
|Waiting time||About 5-10 minutes (due to temperature and humidity vary)|
|Construction time||After the completion of total waiting time, about 15-20 minutes (due to temperature and humidity vary)|
|Load time||≥24 hours|
|Final tack strength||≥72 hours|
Contact Person: winsom